Table Of Contents

Installing A Washing Machine Drain Hose

With a new washing machine or a better model, the guarantee of a better wash is brought to you. Many of the models on the market claim to have faster wash cycles. The advertising for some washing machines in certain TV advertisements even implies that doing laundry with such machines makes people happy.

Even if the ads aren’t entirely accurate, they usually leave out the bit about figuring out the plumbing. An important aspect of the transaction is making sure your home appliance is correctly connected so it functions well. When this happens, it’s critical to connect your washing machine’s drain line properly.

Importance Of Drain Hoses For Washing Machines

A washing machine’s drain pipe transports filthy water from the pump to the house’s main sewer line. The hose may be a single piece on certain washers or an assembly on others. Additionally, a separator plate on the washer’s rear panel connects the two hoses in the assembly.

To get to the pump-out hose, you often have to remove the washing machine cabinet, which is the metal lid. The hose may clog, crack, or split with time, resulting in leaks. Thus it has to be changed when necessary. One of the most critical parts of a washing machine is the drain hose.

It’s a crucial piece of equipment for keeping your water in balance. As a consequence, if your washing machine drain hose breaks, you’ll need to know how to replace it quickly. Once you’ve mastered this new technique, you’ll be able to swiftly and simply replace a worn-out or damaged one.

Drain Hose Installation: A Step-By-Step Guide

Step One: Gather your materials

Before you start learning the process of how to install a washing machine drains hose, you’ll need to gather a few supplies. The first thing that has to be replaced is the drain pipe. These are often found at local hardware shops. To get a new part, you may need to get in touch with the manufacturer directly. Consult your washing machine’s handbook to determine the correct model.

A single piece of paper and a pencil are the only other tools you’ll need after that. You’ll also need an adjustable wrench and bucket. All of these things will make learning how to install a washing machines drain hose a lot quicker and less complicated. Additionally, they can make it such that these repairs may be carried out quickly and easily with little to no trouble or problems.

Step Two: List the features of the appliance

Spend some time researching and making a note of how your wash machine drains as well as the specs on a piece of paper. In most cases, you’ll find the answers to these questions in the handbook that came with your appliance. You’ll find it simpler to locate and buy a drain hose with this knowledge. The model and serial number, on the other hand, should be noted.

If you need a drain hose that suits your machine, bring these specifics with you to an appliance shop. Some shops may have the tube on hand, while others may need to order it. Before you start, make sure your washing machine is ready to use so you can keep washing your clothing.

Step Three: Get the job done

It’s essential to know how to set up your washing machine before you begin learning how to install a drain line. Do not do anything yet until after you have turned off the water supply. For the most part, this line is hidden beneath the washer’s cabinet. To turn it on, just use your hand or a wrench on the valve.

When changing the hose, follow these procedures to prevent electric shocks or hazardous leaks. Performing this repair carries some risk, although it isn’t very probable. As a consequence, it’s critical that you take this precautionary measure to safeguard yourself. Wearing rubber boots and gloves can help you stay grounded while you work on these repairs.

Step Four: Dispose of the previous hose

Now that you’re ready to tackle this project, it’s time to unmount the old drain line. To begin, look for the clamps at the rear of the machine where the hose is attached. You should be able to remove the hose from the mountings by simply unscrewing these two screws. Use the pliers to tighten the clamps and the screwdriver to pry them open if necessary.

Pull the hose away from the machine after removing the clamps. See whether there is any obvious corrosion on the clamps. You may need new ones if your old ones are in poor condition. That’s why it’s a good idea to have a couple of spare clamps on hand when getting started.

Make sure the hose connection isn’t filthy by cleaning the area surrounding it. If it is, replace it. Keep it clean with a vacuum cleaner or by wiping it down with a wet cloth if required.

Step Five: Add a new drain hose to the system

It’s time to replace your old drain hose once you’ve removed it. Fortunately, the next stage is a piece of cake. Slide the hose onto the connection and secure it with clamps at both ends. This clamp will help you keep your hose in place and prevent it from slipping off. Slide the drain hose coupling ends over the drain hose ends.

If the hose is excessively tight, it will be challenging to modify. To make sure they snap shut, place them as far back on the coupling as feasible. You should hear a click once you’ve pushed the button to confirm you’ve succeeded. To hold the clamps in place after driving them in, use your wrench to tighten them.

This last step ensures that there are no leaks throughout the washing process. If you’ve read thus far, you should have a firm grasp of the fundamentals of washing machine drain hose installation.

Step Six: Putting the finishing touches on it

Plug your machine back in and turn on the water after attaching the hose. See how the water travels through the tube once you’ve opened it up. If there are any holes in the hose, replace it.

If you discover any leaks, be careful to tighten the clamps and correct them. As a result of this procedure, your washing machine will operate more efficiently overall despite the possibility that certain manufacturing faults are to blame. It’s more likely that human error had a role.

Elevating A Washing Machine Drain Hose

Is it necessary to elevate your washing machine’s drain hose? Drain hose location and height are critical considerations when installing a washing machine. As a result, your washer and dryer will run more efficiently, and your laundry area will be less likely to flood.

To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.

Keeping The Drain Hose In Place

The drain hose on your washing machine is in charge of eliminating wastewater from the machine. Depending on your setup, the wastewater is next transported to a standpipe or a sink.

A tiny alcove constructed into the wall of the washing room is standard in certain houses. This alcove keeps the drainpipe firmly in place. When this is not the case, you’ll need to keep an eye on your drain pipe to make sure it doesn’t come undone.

If your drain line comes loose, you may end up with a wet floor. In terms of drain hose security, there are many options depending on whether your washing machine drains into a laundry tub or the drainpipe, as is common in older models.

Your Washing Machine And Bathtub Positioning

Prior to purchasing a washing machine, take a measurement of the bathtub’s height.

Keep in mind that the distance from the floor to the drain should be no more than 2.4 metres to prevent wastewater from returning to your washing machine. The drain hose’s bent end will be on one end. This must be placed on top of the rim of your washing machine’s tub.

The tub and hose should not be more than 114 centimetres away from your washing machine while doing laundry.

Assemble the laundry container and attach a plastic zip-tie across one of its legs. A great rule to follow is to keep the drain hose away from the tub’s bottom, where it may obstruct water flow.

Connection To Drain Pipes

Drain pipes require the drain hose to be installed above the water level of your washing machine before they can be used. The washing machine’s base shouldn’t be more than 2.4 metres away, and it shouldn’t be less than 46 centimetres away either. The diameter of a typical drain pipe is 5 centimetres. Therefore most drain hoses will fit in there.

To avoid tripping, your drain pipe should be at least 86 centimetres long. Alternatively, if you’re close to a wall, you may use the drain hose’s curved end to connect to the drainpipe. Extend the drain hose approximately 15 centimetres and secure it with a hose clamp to complete the installation.

To attach the clamp to a wall stud, use the included screwdriver and socket. A masonry bit and anchor are required to break through a concrete wall. Are there no nearby walls? You may use a cable strap or a strong zip tie to attach the drain hose to the drainpipe.

Cleaning And Repairing The Drain Hose

Despite the fact that setting up the hose connection only has to be done once, you should not overlook the need to maintain, clean, and ensure it is properly connected. You may add a filter to the end of the hose drain after it’s fitted and attached. You may make your own filter out of an old sock or pair of pantyhose, or you can buy an aluminum or nylon premade filter.

Lint and grime from your clothing are kept out of the drain line, where they may build up and cause a clog. Regardless of whether you use a DIY or store-bought filter, be sure to remove it on a regular basis. Do not use the washing machine for more than 60 days in a row without cleaning it out and installing a new one if necessary.

When To Contact A Professional

The filter will collect most of the lint and dirt, so use a garden hose to spritz it clean. There may also be a lot of dirt near the washer’s base. You must properly clean the washing machine drain hose before use to guarantee adequate drainage.

If there’s debris in the drain pipe or hose, it may block the system and create an overflow. In order to ensure thorough maintenance, it might be best to call a professional to ensure a proper connection.

Blueline Plumbers are your local specialist for all domestic plumbing and gas fitting needs.

Get in touch for a free quote or speak with a qualified plumbing specialist. We will help you find a solution for your emergency plumbing or plumbing repair needs.
We are experts in Canberra hot water systems, providing plumbing and gas fitting solutions for all plumbing issues.